子公司

汽車電子:13828741095

電子煙 :13510760341

明升体育  版權所有  粵ICP備17001856號  網站建設:中企動力  深圳

投訴郵箱:customer.complaint@fzhlt.com   投訴電話tel:0755-82591330-899    /   18123680589

證書報告驗證真偽郵箱:  verification@fzhlt.com

地址:深圳市寶安區沙井街道衙邊學子圍巨基工業園A棟1~2樓

>
>
汽車電子檢測

測試服務

汽車電子檢測

瀏覽量:

各類車用電子部件:

· 車用無線電

· 暖通空調

· 防盜中控係統

· 駕駛角度傳感器

· 控製器

· 顯示器

· 照明

· 底盤位置傳感器和控製器

· 輪胎壓力傳感器

· 倒車提醒裝置

· ACPVCPCCH 功放

· 全球定位裝置

· 直流馬達(用於天窗、座椅、車門、車窗、雨刮器)

EMC測試項目:

· 輻射發射測量

· 傳導發射測量

· 傳導瞬態發射測量

· 輻射抗擾度測試—電波暗室試驗法

· 輻射抗擾度測試—橫向電磁波小室試驗法

· 大電流注入測試—代替法

· 大電流注入測試—閉環法

· 傳導瞬態抗擾度測試—電源線

· 傳導瞬態抗擾度測試—信號線、電感耦合鉗試驗法

· 傳導瞬態抗擾度測試—信號線,直接電容耦合試驗法

· 傳導瞬態抗擾度測試—信號線,電容耦合鉗試驗法

· 磁場抗擾度測試

· 靜電放電測試

測試標準

CE

ECE R10

Unform provisions concerning the approval of vehicles with regard to electromagnetic compatibility.

CISPR

CISPR 25

Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of on-board receivers

EN

EN 13309

Construction machinery – Electromagnetic compatibility of machines with internal power supply

EN

EN 50498

Electromagnetic compatibility (EMC) – Product family standard for aftermarket electronic equipment in vehicles

EN

EN 55025

Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers

ISO

ISO 10605

Road vehicles — Test methods for electrical disturbances from electrostatic discharge

ISO

ISO 11452-1

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology

ISO

ISO 11452-2

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure

ISO

ISO 11452-3

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic mode (TEM) cell

ISO

ISO 11452-4

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)

ISO

ISO 11452-5

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline

ISO

ISO 11452-7

Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 7: Direct radio frequency (RF) power injection

ISO

ISO 11452-8

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields

ISO

ISO 11452-9

Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 9: Portable transmitters

ISO

ISO 11452-10

Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 10: Immunity to conducted disturbances in the extended audio frequency range

ISO

ISO 12097-3

Road Vehicles – Airbag Components – Part 3: Testing of Inflator Assemblies

ISO

ISO 13766

Earth-moving machinery Electromagnetic compatibility

ISO

ISO 16750-2

Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Electrical loads

ISO

ISO 17025

General requirements for the competence of testing and calibration laboratories

ISO

ISO 7637-1

Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations

ISO

ISO 7637-1-2

 

ISO

ISO 7637-2

Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only

ISO

ISO 7637-3

Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines

SAE

J1113-3

Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power

SAE

J1113-4

IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS.BULK CURRENT INJECTION (BCI) METHOD

SAE

J1113-11

Immunity to Conducted Transients on Power Leads

SAE

J1113-12

Electrical Interference by Conduction and CouplingCapacitive and Inductive Coupling via Lines Other than Supply Lines

SAE

J1113-13

Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsPart 13: Immunity to Electrostatic Discharge

SAE

J1113-21

Electronmagnetic Compatibility Measurement Procedure for Vehicle Components – Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber

SAE

J1113-22

Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Part 22—Immunity to Radiated Magnetic Fields

SAE

J1113-23

Electromagnetic Compatibility Measurement Procedure for Vehicle Components – Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method, Recommended Practice

SAE

J1113-24

Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz—Crawford TEM Cell and 10 kHz to 5 GHz—Wideband TEM Cell

SAE

J1113-41

Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used on Board Vehicles

SAE

J1113-42

Electromagnetic Compatibility—Component Test Procedure—Part 42—Conducted Transient Emissions

 

ECE R10

CISPR 25

EN 13309

EN 50498

EN 55025

ISO 10605

ISO 11452-1

ISO 11452-2

ISO 11452-3

ISO 11452-4

ISO 11452-5

ISO 11452-7

ISO 11452-8

ISO 11452-9

ISO 11452-10

ISO 12097-3

ISO 13766

ISO 16750-2

ISO 17025

ISO 7637-1

ISO 7637-1-2

ISO 7637-2

ISO 7637-3

J1113-3

J1113-4

J1113-11

J1113-12

J1113-13

J1113-21

J1113-22

J1113-23

J1113-24

J1113-41

J1113-42

 

 

 

 

 

專業設備:

· 3米電波暗室

· CISPR25電波暗室

· 羅德與施瓦茨ESR3 EMI接收機

· 夏弗納CBA 9436射頻功放

· CPI VZS/C-6963J2功放

· AR FL7006場強探頭

· 羅德與施瓦茨E8257D信號發生器

· Milmega AS0104-400/200ST RF射頻功放

· AR100W1000B 100W功放

· 特測NSG437靜電放電槍

· EM Test傳導瞬態抗擾度測試係統

· 泰克TDS 3054B示波器

· 高壓人工網絡

· EM Test連續波模擬器